Quimicos Henkel - Hysol
 |
Cyanoacrylate Adhesives
101 General purpose, wicking type, plastic bonding
102 General purpose, plastic bonding
105 General purpose, elastomer bonding
108 Intermediate gap fill, plastic bonding
170 Metal bonding, maximum gap fill
200 Wire tacking, good flow control
240 Plastic bonding, maximum gap fill and flow control
260 Penetrating, fast curing
268 Fast curing, intermediate gap fill
731 Fast curing, maximum gap fill
735 Toughened with high peel, impact and shear strength
737 Toughened with high peel, impact and shear strength
738 Impact resistant, gap fill
790 Surface insensitive, extremely fast curing, wicking type
791 Surface insensitive, extremely fast curing, close fitting parts
792 Surface insensitive, extremely fast curing, close fitting parts
795 Surface insensitive, extremely fast curing, general purpose
798 Surface insensitive, extremely fast curing, intermediate gap fill
799 Surface insensitive, extremely fast curing, maximum gap fill
801 High temperature resistant to 130°C, wicking type
802 High temperature resistant to 160°C
820 High temperature resistant to 200°C
2010 Thixotropic gel, maximum gap fill
2011 Thixotropic gel, non-sag, surface insensitive
910 General purpose, metal bonding
910FS Metal bonding, wicking type
919 Wicking type, high temperature resistant to 250°C
920 General purpose, high temperature resistant to 250°C
922 Maximum gap fill, high temperature resistant to 250°C
940 Low odor & low bloom, wicking type
941 Low odor & low bloom; close fitting parts
943 Low odor & non-blooming; general purpose
947 Low odor & low bloom; gap fill
POP Polyolefins primer
QFS16 Cyanoacrylate accelerator
CSA-NF Non-flammable CA accelerator
CSA CA accelerator
Anaerobic Adhesives
A136 General purpose
HH190 General purpose flange sealant
MH196 Fast curing, high temperature resistant
LH197 Medium strength, flexible
MH199 Highly thixotropic, high temperature resistant
A025 High temperature resistant
A118 High strength, low viscosity
A126 Wicking grade for post assembly
A134 High strength, high viscosity
A1046 High strength, toughened
F201 Medium viscosity, toughened
F202 High viscosity, toughened
HH040 General purpose, maximum gap fill
HH040 Pure General purpose, NSF/ANSI 61 Certified
HL138 General purpose, press fit
HM135 Rapid cure, ideal for chrome parts
HM160 General purpose, slip fit
HM161 Gap fill, slip fits
HM162 Fast curing, high temperature resistant
HM163 Rapid cure, ideal for chrome parts good gap fill
HM165 Maximum gap fill, high temperature resistant
HH167 Maximum gap fill, metal repair
A011 Low strength, easy to remove
A113 General purpose
A130 Thixotropic
A1042 General purpose, ideal for hydraulics, fast cure
LM113 Removal, low strength for small diameter fasteners.
MM115 General purpose, removable
MM115 Pure Removal, general purpose NSF/ANSI 61 Certified
HM118 High strength, removable.
HH120 Permanent, maximum strength, large diameter bolts.
HL126 Wicking grade for post assembly
HM128 Permanent, general purpose
LM113 Removal, low strength for small diameter fasteners.
LM113 Removal, low strength for small diameter fasteners.
MM115 General purpose, removable
MM115 Pure Removal, general purpose NSF/ANSI 61 Certified
HM129 Permanent, high strength, up to 1" diameter fasteners
HH131 Permanent, high temperature resistant.
A129 Medium strength
A131 Low strength, easy to remove
A1044 High strength
A1058 For large diameter pipes
LM012 No fillers, hydraulic sealing
LH050 General purpose pipe sealant
LH050 Pure General purpose, NSF/ANSI Certified
LH051 Automatic dispensing
MH052 Medium strength sealant
A905 Activator for all anaerobic grades
ASC10 Activator for all anaerobic grades
Two-Part Epoxy Adhesives
ET500 Very fast curing, clear, non-yellowing.
ET505 Tough, structural multipurpose adhesive for bonding .
ET510 Rapid curing and flexible for excellent impact.
ET515 Clear and flexible, again with excellent peel.
ET536 Toughened, thixotropic, excellent gap fill and flow control.
ET538 Toughened, thixotropic, excellent gap fill and flow control.
ET540 Toughened, thixotropic, excellent gap fill and flow control.
Single-Part, Heat-Cure Epoxy Adhesives
ES550 Toughened, non-sagging at curing temperature.
ES558 Toughened, free flowing at curing temperature.
ES562 White, free flowing at curing temperature.
ES569 High strength bonding, non-sagging at curing temperature.
ES578 High temperature resistance, bonding metals and ceramic.
Structural Acrylic Adhesives
TA430 Very high strength bonding of metals, plastics, ceramics.
TA435 Very high strength bonding of metals.
TA436 Very high strength bonding of metals, ferrites.
TA437 To bond ferrites and metals.
TA439 Ideal for sealed electric motors.
TA440 Bead on bead for rapid bonding of metal, glass, wood.
TA4246 No-mix resin and initiator for high strength bonding .
TA4300 2-part 1:1 rapid curing, gap filling, toughened.
TA4302 2-part 1:1 very rapid cure, can be applied bead on bead.
TA4310 2-part 1:1 longer handling time than TA4300, gap filling.
UV Light Curable Adhesives
UV610 High strength bonding for glass to metal.
UV620 General purpose, optically clear. Ideal for glass bonding.
UV625 Non-drip for larger gaps and vertical applications.
UV630 Low viscosity, plastic bonding.
UV632 Plastic bonding, excellent adhesion to acrylic.
UV640 Medium viscosity, plastic bonding.
UV648 Plastic bonding. excellent adhesion to acrylic.
UV670 Flexible for metal and metalized plastics.
UV7141 For bonding ceramic coated glass, mirrors, glass, metal.
Teléfono:
5260383-2634018
Móvil:
3212354539
Fax:
5260383
ventas sales@airteamtech.com
Jorge Alberto Lobo Gerente General
Movil:3212354539
jlobo@airteamtech.com